9/13/2020 0 Comments Eplan P8 Vs Autocad Electrical
Along with this software you get the full manual for the software ready to print.This article focuses on the pros and cons of using the two types of CAD software for electrical purposes.When you want to drill a hole in a board, you use a wood bit.If you use the wood bit for the wall, or the wall drill for the board, you can still do the job, but you will have to spend extra time doing it and, well, the result might just not be as good as you expected.
Eplan P8 Vs Autocad Electrical Manual For TheIt is a brilliant tool for construction drawings, with loads of intelligent functions for shaping, changing diameters, viewing details from various perspectives, exploding drawings etc. When this is what you need, AutoCAD is the right software for you. This is what AutoCAD is designed for basically, this is the very core of the software. Adding extra electrical functions on top of the construction core, therefore gives a more timeconsuming workflow. Just like adding constructional functions to an electrical CAD software would give a mediocre result. Using AutoCAD for electrical documentation therefore requires an extra person to create the documentation based on sketches from the electrical professionals. This involves communication back and forth between the persons involved including the misunderstandings this might bring. This means that they can contain an article number for the component they represent and even more important: the electrical connection points of the components can be identified and handled intelligent by the software. This is for instance the case in our electrical CAD software, PCSCHEMATIC Automation, which also has all the facilities mentioned above. When you copy these symbols in the diagrams, the copied symbols still carry the same article data as the originals. Having completed the ground plan in AutoCAD, you just insert it in the electrical software as a so-called OLE object. The electrical information is then stored in PCSCHEMATIC Automation. ![]() You can then change the ground plan as you normally do in AutoCAD. ![]() ![]() They load the file, and add the electrical documentation to the ground plan. Having added the electrical information, the electrical drawings are exported back to AutoCAD in DWGDXF format, so that the architect gets the information that he needs. Apart from this, it is worth mentioning that creating ground plan drawings actually is quite simple in PCSCHEMATIC on a draft or tender material level but you probably shouldnt build a house from it. If you only need to draw a circuit diagram once a month, including a parts list with only 38 components, you could still do with AutoCAD.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |